HP LaserJet P4015 Displays 49.4C27 Error Message

HP LaserJet P4015 intermittently displays 49.4C27 Error message. All printing halts and printer has to be rebooted to being printing again.

HP Support recommends updating the printer firmware to version: 04.049.3, but it has been reported this error occurs with the new firmware as well.

Resolution:
Navigate thru the printer menu (on the front panel LCD display)
Menu
Configure Device
I/O
Embedded Jet Direct Menu

Disable ALL protocols that are not being used and are not configured.

Such as, if you are only using TCP/IP protocol, disable IPX/SPX, disable Appletalk, and disable DLC/LLC.

To disable a protocol:
navigate to the protocol
press OK
ENABLE will display
press OK
press Down arrow to highlight OFF
press OK

This error has been resolved by disabling all protocols not configured and not being used. (despite what version of firmware is being used)

Online Manual:
HP LaserJet P4015 USER Guide From HP.com

HP LaserJet P4015 USER Guide From docstoc.com